Our full range of Pipe Identification Tapes offer a quick, easy and cost effective way to mark up all your pipework to comply with the British Standard regulations. We are continually increasing our range of standard Pipe Identification Tapes and our latest additions are:
For Gas: Bio-Methane
This 50mm wide self-adhesive tape has a yellow ochre 08-C-35 flood coat, the British Standard colour for Gas , with Bio-Methane printed in black. Each roll is 33 metres long.
These 50mm wide self-adhesive tapes all have a green 12-D-45 flood coat, the British Standard colour for Water and black text. Each roll is 33 metres long.
With over 40 standard Water Tapes to choose from, click here to see the full range.
Coloured and Directional Pipe ID Tapes
When you need to mark up your pipework with full banding to the British Standard, why not team up our 50mm wide text tapes with our Directional Arrows and Coloured Tapes. The coloured tapes are available in 50mm, 100mm and 150mm widths.
Pipe Banding and Pipe Markers
If you are looking for something more bespoke have a look at our Pipe Markers and Pipe Banding. These are printed to comply with the British Standard requirements, but can also have your specific text added and both are available in three sizes to suit all pipework diameters.
We are pleased to announce that due to our increased workload, over the last few months we have been busy recruiting and training new staff so that we can continue to provide the best possible service and the quickest possible turnaround on all orders.
A little bit about our history
Most of you will already know Ray and Linda Thomas, the directors of R M Labels Limited. Ray started R M Labels Limited nearly 30 years ago now.
As a plumber by trade Ray has an in depth knowledge of the industry and with his expertise always to hand, we can help you find the best possible solution when it comes to the identification of pipework. As the business grew, Ray’s wife Linda became involved and they have now been running the business together for over 20 years.
Tash Greenhalgh joined us two years ago and everyone who calls up to
place an order will probably already know Tash; we get many great comments from our customers about how she is always so helpful and cheerful when they call in. With the wealth of knowledge Tash has learnt since she has been with us, she can usually answer all your queries, provide you with quotations or process your orders straightaway.
Our new recruits
To help Tash with her workload, Sophie Jamieson has now joined us. If
you have recently placed an order with us, you will probably have received one of Sophie’s short videos letting you know your goods are on the way, or you may already have spoken to her on the telephone. Sophie is still learning the ropes, so please bear with her if she has to refer to us regarding your enquiries.
Producing your order…
In production we have Harry Oliver and Adam Davies.
We now have a large new unit in Haverfordwest where all the production takes place; our registered office still remains in Letterston.
Give us a call
With Tash and now Sophie as well at the end of the line ready to take your calls, together they can answer most questions.
For help with all things to do with Pipe Banding and Pipe Identification Tapes to the British Standard BS 1710:2014 give us a call and ask to speak to Linda, who will be happy to discuss your requirements, help you understand the changes that came into place in 2014 regarding the labelling of water pipework and help you to choose the right product for the job.
If you require a bespoke product please give us a call, as having worked in the plumbing, heating and pipework industry for many years, Ray is always happy to discuss any new requirements you may have.
At R M Labels Limited we strive to offer high quality products, together with the best possible service, giving our customers a quick, reliable turnaround and so allowing them to get on with the job in hand.
All pipework containing water should be clearly marked to show where the water comes from and whether it is potable or non-potable, to avoid
contamination of drinking water. This is clearly described in the BS 1710:2014 specification for Identification of Pipelines and Services. Below is an extract from the BSI (British Standard Institution) website giving an overview of the revisions that came into effect in 2014:
BS 1710 specifies the colours and other information that should be used to identify pipes, ducts and electrical conduits.
As the last version of the standard was published in 1984, it is long out of date. There was a particular need to update the coding system for the water supply industry, where alternative water reuse systems are becoming more popular – and where alterations can lead to contaminated drinking water if the content of different pipes is not explicit.
BSI has now fully revised the standard. Among other things, the new version:
Refines the labelling system to aid identification
Simplifies identification in building and water systems
Introduces a new three-size methodology to accommodate the full range of fluid services
Removes ship systems, which are now covered in BS ISO 14726
BS 1710:2014 will support the legal requirement for those who install and use plumbing systems to prevent cross contamination.
More broadly the new standard will be of interest to building designers, operators, users and service installers, and a wide variety of associated industries and activities including waste, water, liquid fuels, gases, and refrigeration.