If you have any questions regarding any of our products or wish to discuss your requirements, we are always happy to help! You can contact us on 01348 840 675 or your can email us at [email protected].
Our full range of Pipe Identification Tapes offer a quick, easy and cost effective way to mark up all your pipework to comply with the British Standard regulations. We are continually increasing our range of standard Pipe Identification Tapes and our latest additions are:
For Gas: Bio-Methane
This 50mm wide self-adhesive tape has a yellow ochre 08-C-35 flood coat, the British Standard colour for Gas , with Bio-Methane printed in black. Each roll is 33 metres long.
These 50mm wide self-adhesive tapes all have a green 12-D-45 flood coat, the British Standard colour for Water and black text. Each roll is 33 metres long.
With over 40 standard Water Tapes to choose from, click here to see the full range.
Coloured and Directional Pipe ID Tapes
When you need to mark up your pipework with full banding to the British Standard, why not team up our 50mm wide text tapes with our Directional Arrows and Coloured Tapes. The coloured tapes are available in 50mm, 100mm and 150mm widths.
Pipe Banding and Pipe Markers
If you are looking for something more bespoke have a look at our Pipe Markers and Pipe Banding. These are printed to comply with the British Standard requirements, but can also have your specific text added and both are available in three sizes to suit all pipework diameters.
In the PHAM News article below, Kevin Wellman of CIPHE talks about how seriously water safety is taken, looking at the level of training required compared with the mandatory level of training necessary for gas installers.
Water safety can often be overlooked or taken for granted, but potential risks should not be underestimated. Kevin Wellman, CEO of the CIPHE, puts the case for a more comprehensive approach to protecting the public and safeguarding the reputation of professionals.
It may be a shock to some that hot water scalding and Legionnaires’ disease is making a significant contribution to the number of fatalities and deaths in this country, on par with, and in some cases exceeding, the number of carbon monoxide related incidents in the UK. One reason for this is likely due to the fact that gas related tragedies in the home and commercial environments has long been recognised and publicised as a health risk. In addition industry has embraced legislation to affect changes that have saved many lives. Water safety on the other hand can be overlooked by both installers and homeowners who often do not realise the potential dangers of not properly managing water temperatures and bacteria.
At the CIPHE, we make a point of discussing water safety issues with our members, manufacturers, consumer organisations and trade bodies. After all, it is the job of the plumbing and heating industry, as a whole, to stamp out unscrupulous work. Only through education and bringing issues like water safety to the attention of the entire supply chain can we make progress and prevent the unnecessary and avoidable deaths of those using hot water systems which aren’t safe or suitable for them – this includes vulnerable users as well as the public at large. What we must remember is that nobody is exempt from the dangers of scalding and Legionaries’ disease, so the only real option is to ensure that the right steps are taken to actively stamp out the risk.
What can be done?
The reality is that there is lots that can be done to ensure water safety is front of mind – namely this can be achieved through education and ensuring that installers have access to relevant safety information and resources. This is vital to helping plumbing and heating professionals keep up to date with the latest standards and preventative measures covering water safety.
A part of this is addressing skills early on. Plumbing apprenticeships 100 years ago used to be seven years long; 50 years ago it was five years long; now there are schools of thought that specify just two years as being sufficient. This decrease in training, along with advancements in product technology, gives rise to the concern that not all of the trade can be fully competent.
Further, when you compare the level of mandatory training gas installers must undertake, for example the 5-6 days of training required each year under the Nationally Accredited Certification Scheme (ACS) in order to renew their licence every five years, unfortunately water safety just doesn’t have the same level of training required. As an industry, water regulations were produced back in 1999 with training happening on a voluntary basis. Therefore, the reality for water safety and training under current schemes means installers are under no obligation to update their skills. This is where the CIPHE and like-minded organisations come in to put pressure on current ways of working and encourage members to make a change.
The CIPHE’s CPD Charter is designed to ensure that skills, based on agreed competency requirements, are supported and met by plumbing and heating professionals who undertake training. The idea is that the public will benefit directly by professionals updating their skills on topics such as water safety on a regular basis. Our view is that professionals may have undertaken training at the very beginning of their career and if work isn’t done to support the ongoing development of skills, the industry will move on without them.
It is evident that a greater skilled workforce for installation and maintenance of hot water systems is needed, which is why I urge trade professionals to become involved with the CIPHE and take advantage of all the resources we have to offer.
For more information about water safety, to request the CIPHE’s Safe Water Guide, and for membership enquiries, please email: [email protected] or call 01708 472791.
At R M Labels we have a comprehensive range of products for marking up water pipework and systems; if you need help selecting the right product for the job, give us a call on 01348 840 675 and we will be happy to assist.
We are pleased to announce that due to our increased workload, over the last few months we have been busy recruiting and training new staff so that we can continue to provide the best possible service and the quickest possible turnaround on all orders.
A little bit about our history
Most of you will already know Ray and Linda Thomas, the directors of R M Labels Limited. Ray started R M Labels Limited nearly 30 years ago now.
As a plumber by trade Ray has an in depth knowledge of the industry and with his expertise always to hand, we can help you find the best possible solution when it comes to the identification of pipework. As the business grew, Ray’s wife Linda became involved and they have now been running the business together for over 20 years.
Tash Greenhalgh joined us two years ago and everyone who calls up to
place an order will probably already know Tash; we get many great comments from our customers about how she is always so helpful and cheerful when they call in. With the wealth of knowledge Tash has learnt since she has been with us, she can usually answer all your queries, provide you with quotations or process your orders straightaway.
Our new recruits
To help Tash with her workload, Sophie Jamieson has now joined us. If
you have recently placed an order with us, you will probably have received one of Sophie’s short videos letting you know your goods are on the way, or you may already have spoken to her on the telephone. Sophie is still learning the ropes, so please bear with her if she has to refer to us regarding your enquiries.
Producing your order…
In production we have Harry Oliver and Adam Davies.
We now have a large new unit in Haverfordwest where all the production takes place; our registered office still remains in Letterston.
Give us a call
With Tash and now Sophie as well at the end of the line ready to take your calls, together they can answer most questions.
For help with all things to do with Pipe Banding and Pipe Identification Tapes to the British Standard BS 1710:2014 give us a call and ask to speak to Linda, who will be happy to discuss your requirements, help you understand the changes that came into place in 2014 regarding the labelling of water pipework and help you to choose the right product for the job.
If you require a bespoke product please give us a call, as having worked in the plumbing, heating and pipework industry for many years, Ray is always happy to discuss any new requirements you may have.
At R M Labels Limited we strive to offer high quality products, together with the best possible service, giving our customers a quick, reliable turnaround and so allowing them to get on with the job in hand.
It is reported that proposals for a new Clean Air Act should include measures supporting the role of buildings as a ‘safe haven’ from pollution, according to the Building Engineering Services Association (BESA).
“People spend more than 80% of their time indoors and there is still a lot more we can do to improve indoor air quality (IAQ)” says Chief Executive Paul McLaughlin. “A series of low cost maintenance measures to ensure ventilation systems work properly and incoming air is filtered and cleaned would make a major difference to the health and wellbeing of building occupants.”
BESA commissioned a YouGov survey last year that found almost 70% of office workers believed poor air quality in their place of work was having a negative impact on their day-to-day productivity and wellbeing. A third were also concerned that poor IAQ was damaging their health.
“Considerable investment has already been made in improving the airtightness of buildings to reduce energy consumption, and that same process can be used to manage air quality,” argues Paul McLaughlin
All pipework containing water should be clearly marked to show where the water comes from and whether it is potable or non-potable, to avoid
contamination of drinking water. This is clearly described in the BS 1710:2014 specification for Identification of Pipelines and Services. Below is an extract from the BSI (British Standard Institution) website giving an overview of the revisions that came into effect in 2014:
BS 1710 specifies the colours and other information that should be used to identify pipes, ducts and electrical conduits.
As the last version of the standard was published in 1984, it is long out of date. There was a particular need to update the coding system for the water supply industry, where alternative water reuse systems are becoming more popular – and where alterations can lead to contaminated drinking water if the content of different pipes is not explicit.
BSI has now fully revised the standard. Among other things, the new version:
Refines the labelling system to aid identification
Simplifies identification in building and water systems
Introduces a new three-size methodology to accommodate the full range of fluid services
Removes ship systems, which are now covered in BS ISO 14726
BS 1710:2014 will support the legal requirement for those who install and use plumbing systems to prevent cross contamination.
More broadly the new standard will be of interest to building designers, operators, users and service installers, and a wide variety of associated industries and activities including waste, water, liquid fuels, gases, and refrigeration.
In the UK, one third of all domestic water is used for non-potable purposes such as flushing toilets, watering gardens and use in washing machines and does not need to be of drinking quality. Rainwater harvesting makes both financial and environmental sense providing an easy and efficient way to collect rainwater for reuse in and around the home.
Almost a fifth (18%) more of UK consumers are now actively taking action when it comes to cutting back on water consumption compared to this time last year – an enormous rise in just 12 months.
With more rainwater harvesting solutions being installed in properties, it is important to remember that all associated pipework should be clearly labelled to avoid cross contamination with the drinking water supply. We are continually helping our customers understand the labelling options available for rainwater harvesting products. These products and the supporting pipework should be clearly labelled up as non potable water from any other source to the latest British Standard BS 1710 2014 requirements for water in the correct colours and sizes.
We are always happy to discuss your requirements and offer help choosing the correct labelling solution for your job.
There are a large variety of products available for marking up pipework and sometime it is hard to know which product is the most suitable. Detailed below are some of the options available to you:
A quick and cost effective solution for marking up pipework that does not require full banding. We have a large range of standard self-adhesive pipe markers to choose from and each marker has an arrow either end allowing you to cut off one arrow, leaving the remaining arrow to indication the direction of flow. You can also add your own text to the pipe markers. Available in three sizes to suit all pipe diameters. The Water Pipe Markers are colour banded for water from the Public Water Supply or Any Other Source and for Potable or Non Potable Water. All of the Pipe Marker colours comply with the BS 1710 2014 requirements. View the Pipe Markers
Ideal if you need to mark up pipework with full colour banding. Each piece of banding is available in three sizes to suit all pipework diameters and is long enough to wrap around the pipe. The banding comes with descriptive text viewable from any direction and includes directional arrows, saving time building up full banding with individual rolls of tape. All of the Pipe Banding colours comply with the BS 1710 2014 requirements. View the Pipe Banding
Pipe Identification Tape
A cost effective way to mark up large areas of pipework. Choose from the comprehensive ranges of 50mm wide text tapes and coloured Pipe ID Tapes. The coloured tapes are available in three sizes and can be used together with the text tapes and directional arrow tapes to create full banding to the British Standard requirements. All of the colours for Pipe ID Tapes comply with the BS 1710 2014 requirements. View the Pipe ID Tapes
Engraved Labels and Discs
Produced using a high quality traffolyte engraving laminate, these products are hardwearing and ideal for use in commercial situations such as boiler houses and plant rooms. The standard 42mm diameter discs come complete with chrome plated fixing chains and are ideal for marking up valves; other disc sizes are available. The engraved labels are available in any size and come with screw holes or a self-adhesive backing. View the Engraved Labels and Discs
These credit card sized durable plastic labels are suitable for domestic use. There is a complete range of standard tags for marking up all of the system’s pipework and valves, including tags for plumbing, heating, oil, gas, solar and reclaimed water. Each tag comes complete with a plastic cable tie. View the Valve Tags